Crack paint

Any surface in any form has the ability of accepting this paint, whether it is horizontal or vertical, even on the ceiling or any other certain spatial form of the components.

This paint has many various advantages including:

1. After opening the cap and before anything, you must blend the paint well inside the box. This means that you should blend the paint with a long knife inside the box.
   
2. Now, depending on the size of the work surface to be painted, transfer some paint inside a container free from dirt and add the volume equivalence of that amount of paint to that suitable thinner (10000 to 20000, specific to instant paint) and blend so much that to be again smooth. Then, make it smooth with a proper filter inside another container.
   
3. In this stage, blending thinned paint from the available colors, provide the crack paint of your color.
   
4. Now, depending on the kind of the component, select the color structure for lining and before applying on the component, test it one time on another component and after it was valid, apply it on the final component.
   
5. Now, the primer with the selected and thinned paint must be applied on the final component. Depending on the kind of the shiny primer (the structure of the primer), wait for 2 min to 1 hour until the surface of the component covered by the paint relatively dries. (Note: don't let the surface of the primer dry completely, because depending on the conditions of the environment of painting, this time is variable in temperature and damp).
   
6. In this stage, the thinned and filtered crack paint must be applied.
   
7. Wait until the primer and the crack paint dry at the same time and the crack pattern emerges.
   
8. In this stage, if desired, you can use the suitable varnish on the painted component (that has reached the final drying), depending on the application of the component.
   

Explanations about the related applicable primers:
Any colorable surface has the ability of accepting this paint. Since on non-plastic surfaces, shiny primers forming the paint of the cracks under the work must be used, in accepting primers, you don't have any constraints, but before using, please test it on a small surface on the component.
Explanations about the final applicable surface varnishes:
Any varnish can be applied on the finished work after final drying, whether it is shiny or not shiny, ranging from petro resin to oily, immediate and also polyester, polyurethane etc.
Usable thinners:
For normal and metallic crack paints, you can use immediate high quality 10000 to 2000 thinners. (This point is more important for metallic crack paint). Care that the quality of the thinner is also very important.

The crack paint can be maintained inside the box for at least 2 and at most 5 years if its cap is not removed, but if its paint dried unintentionally, first the dried paint must be completely ground and it must be gradually solved in thinner. Then it can be used again. But before using, it must be filtered by a mesh and must be sure from its grain.

This paint, if applied with a suitable primer and polyurethane varnish, can show resistance on the external surfaces at least for 2 and at most for 5 years depending on the conditions, although the resistance of this paint on the surfaces on which protecting varnish is used is directly the resistance of the applied varnish and the adherence of the set of colorful films applied on the component is that of the primer applied.

Considerable notes:
Crack paint is a pasty product with a high viscosity that can't be maintained with an open cap due to high solvent vapor. For this reason, the crack paint is very flammable and must be kept with a closed cap in the temperatures lower than 25 °C and far from direct sun.
In the case of accidents, foams stable in alcohol, carbon dioxide or dry firefighting powders must be used.
When using this paint, it is recommended that the environment is ventilated well to obtain a fresh air. If a person faced with problems due to breathing the vapors released during application, in addition to being cool, he/she must be exposed to the free air. In the case of disorders in the respiration rhythms, mouth to mouth respirations must be used and after recovery, he/she must be cared.
When using this paint, use gloves (nitrile or popular working gloves). When using this paint, it is better to use the dresses from natural fibers or having high thermal resistance.
If the empty containers of crack paint have still paint, they must be kept far from fire and must never throw out with a closed cap, because with collection of vapors, the paint of the box becomes highly explosive.
After any using, close the cap of the box containing the paint and keep it in the temperatures lower than 25°C in a dry environment where it is far from the spark producing resources and the oxidizing factors and the containers containing strong acid and bases and the direct sun.
Prevent from the entrance of thinners containing the paint to the drainage wells or water resources.
Notice that the crack paint must be kept far from the heat, flame and spark producing resources. If the thinned paint sprays to one's eyes, wash them by spraying water at least for 15 minutes and then, keep the eyes completely open.
If the diluted paint is swallowed, be cool and refer to a physician.